Hospital Equipment

Product Details:

Features:

• Doors: Fall back type Double door equipped with double laminated glass doors for a full view-in-process and optimal sound and heat isolation.
• Process sequence: The washer should perform pre-rinsing, cleaning, post rinsing, thermal disinfection, final rinsing and drying phases. Validated programs are secured by access code. Detergents and rinse agents should be automatically dispensed during the cycle.
• Pumps: 2 dosing pump for process chemicals, instrument lubricants/ enzymatic cleaners.
• Drying: Dual drying mechanism with heat exchanger, fan, condenser and HEPA-filter.

• The system is equipped with process tank. For shortest possible filling and draining phases, higher capacity quick opening valves should be used so that short total process time is achieved.

• Cleansable spray arms is located at the top and bottom of the chamber.

• Wash carts are equipped with cleansable spray arms between each shelf so as to facilitate water to reach all the surfaces which needs to be cleaned.

• Injection wash carts is automatically connected to water and drying air in order to clean and dry the inside of the tubular instrument.

• The drying air is pre-heated in a heat exchanger.

• The washer is equipped with independent temperature monitoring and validation test port
• Circulating water pressure monitoring system is provided along with the unit.

• The differential pressure monitoring for HEPA filter is provided.

• Washer is equipped with audible alarm that alerts

Product Details:

Product Details:

Rectangular chamber & pipeline :  SS 304

Working Temperature :  37^OC & 55^oC

Mode of Operation  :  Manual (or) Fully Automatic PLC

Gas Purging  :         Gas Puncture system                    Insulation    :         Glass Wool 25 - 50mm Full

Temperature Controller :         Digital, RTD Type

Door  :         Single Point (or) Radial Locking System

Control :         Individual push button for vacuum system, Gas Puncture, vacuum breaker and heating with Digital PID controller

Compressor   :    Oil free compressor

Operating voltage :         220 voltage / 50 Htz

Non Hazardous :  Total cycle under negative atmosphere   

Specifications:

Product Details:

Features:

• Digital timer Controlled Drying Cabinet with single door suitable for easy and quick drying of instruments, utensils, glass and anesthetic accessories such as corrugated hoses, breathing masks, respiration bags, and surgical instruments trays etc.
• The unit is provided with digital display with countdown drying time and drying time selectors, temperature selector including an indication of selected temperature.
• The drying cabinet is provided with a quick lock door with heat resistant Silicon Expansion gasket
• The chamber is designed to allow uniform air circulation which is done by an impeller
• The system has an adjustable temperature range of 60-90°C with a drying time range of 0-90 minutes.
• The exhaust is provided to ensure complete removal of moisture

Product Details:

Product Details:

• Door: Single door with Radial locking system
• Mode of control: With a multiport valve / Automatic Optional
• Door: SS Door Wing Nut/ Radial Locking
• Pre-vacuum and post vacuum: To eliminate air packs and ensure effective sterilization.
• Water protection: In the event of low water the supply to the heaters is discontinued automatically and visually indicated in the control panel.
• Pressure switch: An automatic pressure switch adjustable type is provided to set the required pressure.
• Vacuum drying: An effective vacuum drying is caused with powerful ejector and vacuum breaker which draws air from the atmosphere. It is filtered, pre-heated(sterilized) and finally enters the working chamber for effective drying.
• Water Gauge glass: To note down the level of water glass tube with gauge is provided.
• Gasket: Silicon Expansion type

Instrumentation:

• Safety Valve
• Vacuum Breaker
• Non-Return Valve
• Steam Trap
• Water Inlet And Water Outlet Valves

The sequence of Automatic operation includes the following:

• Automatic water filling for the steam generator
• Leak test for required time and results with alarm will be displayed and data logged.
• Bowie-did test
• Spore-test results from approved lab submitted
• Pulsing ( vacuuming, purging and pre-heating)_ Optional
• Sterilization with temp and balance time displayed and data logged
• Exhaustion appropriate to liquid, instruments and fabric cycles.
• Drying cycle with the vacuum pump. – Optional
• Final cooling with admission of filtered air (0.2 Micron)
• Sterilization completes with F.O values Displayed and data’s logged

Optional:

• High Vacuum with vacuum pump
• Fully Automatic Micro processor or PLC based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle
• Data Loging System
• Double Door System
• Pulsing Controller

Product Details:

Inner Chamber     :           SS 316

Outer Cover          :            SS 304

Working pressure   :            1.2kg/cm²   & 2.1kg/cm²

Working Temperature    :           121^oC / 134°C

Door                               :           Radial Locking  

Mode of control             :           Digital Temperature cum Timer 

Water protection             :          In the event of low water the supply to the heaters is  discontinued automatically and visually indicated in the  control panel.

Pressure switch                :          An automatic pressure switch adjustable type is provided to  set the required pressure. 

Gasket                                :     Silicon Expansion type

Features

• Safety Valve
• Plug Screen for Discharge Line
• Vacuum Breaker
• Non-Return Valve
• Water inlet and Water outlet valves.

Product Details:

Mode of Control:

• The control system is provided with PLC and user-friendly HMI.The system is provided with manual backup in the case of PLC failure by manual Operating Switches. Here all valves, pumps etc. can be operated via switches.

Door:

• The Sterilizer is provided with Single or Double automatic vertical or horizontal sliding doors fabricated from SS316.
• The door is with mineral wool insulation held in place by a stainless steel outer cover. The door sealing is effected with the help of a silicone door gasket. The gasket is pressurized by compressed air and retracted by vacuum. The door is moved vertically or Horizontally via a pneumatic cylinder. Compound gauges, for gasket pressure, with door status indications are provided on both loading and unloading sides.

Sequence of Automatic operation includes the following:

• Automatic water filling for the steam generator
• Vacuum Leak test.
• Gravity Displacement Program
• Spore-test results from approved lab submitted
• Pulsing ( vacuuming, purging and pre-heating)
• Sterilization with temp and balance time displayed and data logged
• Exhaustion appropriate to liquid, instruments and fabric cycles.
• Drying cycle with the vacuum pump.
• Sterilization completes with F.O values Displayed and data’s logged.

Optional:

• The fully Automatic Micro processor or PLC based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle.
• Suitable SS Trolley and SS Carriage
• Data Logging System
• Single/Double Door System
• Vertical/Horizontal Sliding door
• Pulsing Controller
• A six point strip chart recorder

Product Details:

Features:

• Elegant cabinet with Moving Trolley Fully made of SS 304.
• Individual Illuminated Push Button station for the Following.

1. Hot
2. Cold
3. Rinse
4. Drug Inducing

• The Hot water Generator with Contact less Silicon Heater With Digital Temperature Controller and Pre Filter. All Solenoid valves with 24 volt Dc.
• The View glass is provided with Magnifier and Illumination.The Working Temperature, Pressure, Elapsed Timer and Time Totalizer are provided in Digital.
• A separate container is provided for inducing drug using Peristaltic Pump. The Equipment is provided with a power back up.

Accessories:

1. Pressure monitor PC101(TC4S)

2. Temp controller - TC4S

3. Timer – XT453

4. Totalizer – LT9(TC4S)

5. Temperature Controller(TC4S)

6. Pressure switch

7. Peristatic pump

Product Details:

Features:

• Storing steam in the steam jacket for next consecutive cycle.
• Powerful ejector which creates partial vacuum upto 10 HG. Mercury.
• Separate gauge for jacket and chamber.
• Temperature reading Thermometer.
• Automatic low - water protection.
• Automatic pressure switch.

 

Construction:

• Triple walled construction, unlike the other model the main working chamber is welded to the steam jacket with end ring so that steam is stored in the steam jacket for next consecutive cycle. The working chamber is made of the S.S. Plate to withstand high pressure in the steam jacket. Water is stored in the steam jacket with water level gauge and water inlet and water outlet valve. There is a separate valve for injecting steam into the inner chamber.

Instrumentation:

• Pressure Gauge for Jacket
• Compound Gauge for Chamber
• Safety Valve
• Thermometer to read inner.
• Pressure Switch
• Water Inlet Valve & Water Outlet Valve
• Water Level Gauge
• Ejector Valve

Optional:

• Fully Automatic Micro processor based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle.
• Selector switch for regular and high speed.

Product Details:

Capacity: 23 Litres. Chamber: SS316 L Types of Cycles Process: Class B- Model Air Filter : An air filter is provided for filtering the atmospheric air before entering inside the chamber .The filter separation efficiency is higher than 99.998% for particle size less than 0.3µm. Automatic Cycle programs: 9 Cycles  134°C Wrapped.  121°C Wrapped.  134°C Un wrapped.  121°C Un wrapped.  Plastic  Cotton  Prion  Test Programs :Leak Test Test programs : Bowie Dick

Steam Generator : Spray Type to ensure Uniform Pressure and Temperature. Water Storage Tank: Water reservoir with storage capacity up to 5 Liters. With water circulation Control Panel: Digital LCD which Displays Temperature, Pressure, Time, Running Status, Fault Alarm and Other information with Built In Printer Error Control : The range of alarm includes Temperature & Pressure sensor failure, phase time-out, doors not properly closed, self-checking of all the safety devices, low water level etc. Printer : Thermal Printer to Print Entire Cycle Operation

Product Details:

Product Details:

• Stainless Steel Hot cold Sterilizer with separate Hot cold sterile water
• Aseptic devices include self- sterilization elimination of water recontamination.
• Cold water sterilizer is fitted with a cooling coil for circulation of water from the main.
• Unit rests on elegantly finished tubular stand
• The unit consist of individual controls such as safety valves, pressure gauge, steam trap, self-sterilizing water filter , water level indicator and air filter

Product Details:

Chamber Capacity : 225 - 1000 Liters    

Door : Vertical Sliding/ Radial Locking Double  Door with Pneumatic Operation

Door Safeties : Cycle will not start until the door is shut properly, Door automatically stops if an obstruction is detected, Door cannot be opened when the chamber is pressurized, Prevents both doors from being opened simultaneously.

Inner Chamber, Door, Steam Generator and Jacket :      SS 316 L

Insulation for Jacket and Doors : 60 mm Chloride free mineral wool.

Pipes and Valves: Piping system made up of SS304 with Pneumatic Operated Piston type valve 

Steam Generator : Inbuilt Steam Generator made up of SS 316L, 50 mm Chloride free mineral wool, Safety Valve, Heating capacity of 45Kw.

Vacuum Pump: High capacity efficient liquid ring type vacuum pump with Condenser for pre and Post Vacuum Pulsing

Automatic Water Pump : High Pressure Feed water Pump for Automatic Water Filling.

Operating Interface : Dual PLC control Based Fully Automatic HMI 7” Touchscreen on Both Loading and Unloading Side with COM ports for printer & PC communications, Password Protected, Data Logging facility,  Different setting of cycles which are pre selectable and Editable as per User requirement, HMI displays Chamber Temperature, Pressure, Time, Date, Cycle No, Batch No, alert message with Audio visual alarm for Chamber and Steam Generator High Pressure and Temperature, Low Water level in Generator, Vacuum pump and Water pump error, Temperature and Pressure sensor failure.

Automatic Program Cycles : 65^oC Formalin Process, 80^oC Formalin Process, 121^oC Steam Sterilization Process, 134^oC Steam Sterilization Process, Bowie-Dick Test, Leak Rate Test, Rapid Cooling process. 

Sensors : Two Temperature probes and Two Pressure Transducers for chamber and Jacket with temperature accuracy of ±0.1°C and pressure accuracy of 1%

Formalin Injection : Through sealed bottle  can be used for 2 cycles

Printer: Alpha numeric Printer which prints whole cycle parameters  

Air Filter : HEPA air filter with 99.99% of efficiency for particle less than 0.3µm.

Data logging  :  Can Be Viewed through HMI  and also can be stored in the system through SD card.

Jacket cooling system  for sudden loading of LTSF from high Temperature Cycle.

HCHO Monitoring the level and consumed quantity displayed at the End Cycle.

Additional Information:

• Item Code: 8419
• Production Capacity: 200
• Delivery Time: 2 months
• Packaging Details: Wooden Packing

Product Details:

Product Details:

• Timer1to 99 minutes
• Capacity  (20 - 100 Litres)
• Temperature 20 to 80 °C
• With LED digital display for Timer and Temperature
• Turbo power normal and soft function to resolve the cleaning blind spot
• Degas Function for Laboratory Purpose, Memory function
• Automatically Ultra sonic frequency Tracking
• POS Stainless Steel 304Tank and Basket
• Stamping Tank without welding gap for better water proof
• Stainless steel Housing Lid
• Powerful ultra-sonic transducer for efficiency and cleaning effect
• Ceramic heaters for better heating effect.
• Drainage with cool Fan is available
• Special Cooling system, components to work more steady.
• Moisture proof and Anti-Corrosion PCB capable for different working Environments.
• Ultra Sonic Frequency40 KHZ

Product Details:

Spray gun rinser with 8 different attachments used for cleaning syringes , catheters, endoscopes, cystoscopies and variety of other instruments and articles used in sterile services.

Product Details:

Features:

• To shred the heated waste like stringer glass valve, plastic catheters, IV bottles and plastic products
• Low-speed, low-noise and vibration-free operation.
• High torque due to 2-stage spur gearing with epicyclic gearing.
• Fully hardened knives made of high quality special steel for long tool life.
• Robust modular system hospitals, clinics, general and nuclear medicine, labs, banks, offices, chemical-pharmaceutical industry, medical technology, metallurgy, authorities, department stores, electronics industry a.m.m. Size reduction of recoverable and residual waste for the purpose of volume reduction recycling destruction of confident data.
• Customized programmable control system with automatic reverse mode.
• High fit accuracy of cutting shafts due to multiblade reaming.
• Various shapes of knives to meet various thru put and material requirements.
• Permanent quality and production control.

Product Details:

Product Details:

The Gauge Cutting Machine operate on a single phase motor and consist of a cutting unit and a knife sharpening unit that gives a finely honed edge to the cutting blade on the touch of a control button.