Autoclave Sterilizer

Product Details:

• Door: Single door with Radial locking/ Sliding Door system
• Mode of control: With a multiport valve / Automatic Optional
• Pre-vacuum and Post vacuum: To eliminate air packs and ensure effective sterilization.
• Water protection: In the event of low water the supply to the heaters is discontinued automatically and visually indicated in the control panel.
• Pressure switch: An automatic pressure switches adjustable type is provided to set the required pressure.
• Vacuum drying: An effective vacuum drying is caused with powerful ejector and vacuum breaker which draws air from the atmosphere. It is filtered, pre-heated(sterilized) and finally enters the working chamber for effective drying.
• Water Gauge glass: To note down the level of water glass tube with gauge is provided.
• Gasket: Silicon Expansion type

• Automatic water filling for the steam generator
• Leak test for required time and results with alarm will be displayed and data logged.
• Bowie- disk test
• Spore-test results from approved lab submitted
• Pulsing ( vacuuming, purging and pre-heating)
• Sterilization with temp and balance time displayed and data logged
• Exhaustion appropriate to liquid, instruments and fabric cycles.
• Final cooling with admission of filtered air (0.01 Micron)
• Sterilization completes with F.O values Displayed and data’s logged.

• High Vacuum with vacuum pump
• The fully Automatic Micro processor or PLC based programmable with solenoid valve operation.
• Suitable for Liquid, Instruments and Fabric cycle Suitable SS Trolley and SS Carriage
• Data Logging System
• Double Door System
• Vertical/Horizontal Sliding door
• Pulsing Controller

Product Details:

• Door: Single door with Radial locking system
• Mode of control: With a multiport valve / Automatic Optional
• Door: SS Door Wing Nut/ Radial Locking
• Pre-vacuum and post vacuum: To eliminate air packs and ensure effective sterilization.
• Water protection: In the event of low water the supply to the heaters is discontinued automatically and visually indicated in the control panel.
• Pressure switch: An automatic pressure switch adjustable type is provided to set the required pressure.
• Vacuum drying: An effective vacuum drying is caused with powerful ejector and vacuum breaker which draws air from the atmosphere. It is filtered, pre-heated(sterilized) and finally enters the working chamber for effective drying.
• Water Gauge glass: To note down the level of water glass tube with gauge is provided.
• Gasket: Silicon Expansion type

• Safety Valve
• Vacuum Breaker
• Non-Return Valve
• Steam Trap
• Water Inlet And Water Outlet Valves

• Automatic water filling for the steam generator
• Leak test for required time and results with alarm will be displayed and data logged.
• Bowie-did test
• Spore-test results from approved lab submitted
• Pulsing ( vacuuming, purging and pre-heating)_ Optional
• Sterilization with temp and balance time displayed and data logged
• Exhaustion appropriate to liquid, instruments and fabric cycles.
• Drying cycle with the vacuum pump. – Optional
• Final cooling with admission of filtered air (0.2 Micron)
• Sterilization completes with F.O values Displayed and data’s logged

• High Vacuum with vacuum pump
• Fully Automatic Micro processor or PLC based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle
• Data Loging System
• Double Door System
• Pulsing Controller

Product Details:

Chamber Capacity : 225 - 1000 Liters    

Door : Vertical Sliding / Radial Locking Double  Door with Pneumatic Operation

Door Safeties : Cycle will not start until the door is shut properly, Door automatically stops if an obstruction is detected, Door cannot be opened when the chamber is pressurized, Prevents both doors from being opened simultaneously.

Inner Chamber, Door, Steam Generator and Jacket :      SS 316 L

Insulation for Jacket and Doors : 60 mm Chloride free mineral wool.

Pipes and Valves: Piping system made up of SS304 with Pneumatic Operated Piston type valve 

Steam Generator : Inbuilt Steam Generator made up of SS 316L, 50 mm Chloride free mineral wool, Safety Valve, Heating capacity of 45Kw.

Vacuum Pump: High capacity efficient liquid ring type vacuum pump with Condenser for pre and Post Vacuum Pulsing

Automatic Water Pump : High Pressure Feed water Pump for Automatic Water Filling.

Operating Interface : Dual PLC control Based Fully Automatic HMI 7” Touchscreen on Both Loading and Unloading Side with COM ports for printer & PC communications, Password Protected, Data Logging facility,  Different setting of cycles which are pre selectable and Editable as per User requirement, HMI displays Chamber Temperature, Pressure, Time, Date, Cycle No, Batch No, alert message with Audio visual alarm for Chamber and Steam Generator High Pressure and Temperature, Low Water level in Generator, Vacuum pump and Water pump error, Temperature and Pressure sensor failure.

Automatic Program Cycles : 65^oC Formalin Process, 80^oC Formalin Process, 121^oC Steam Sterilization Process, 134^oC Steam Sterilization Process, Bowie-Dick Test, Leak Rate Test, Rapid Cooling process. 

Sensors : Two Temperature probes and Two Pressure Transducers for chamber and Jacket with temperature accuracy of ±0.1°C and pressure accuracy of 1%

Formalin Injection : Through sealed bottle  can be used for 2 cycles

Printer: Alpha numeric Printer which prints whole cycle parameters  

Air Filter : HEPA air filter with 99.99% of efficiency for particle less than 0.3µm.

Data logging  :  Can Be Viewed through HMI  and also can be stored in the system through SD card.

Jacket cooling system  for sudden loading of LTSF from high Temperature Cycle.

HCHO Monitoring the level and consumed quantity displayed at the End Cycle.

Additional Information:

• Item Code: 84192
• Production Capacity: 200
• Delivery Time: 60 days
• Packaging Details: Wooden Pack